| Customization: | Available |
|---|---|
| After-sales Service: | Supported |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SPECIFICATIONS OF JG95Z GRAPPLE EXCAVATOR | ||||||||||
| RANGE OF OPERATION | Boom length | 3680mm | ||||||||
| Arm length | 2000mm | |||||||||
| Max radius of capture | 7000mm | |||||||||
| Max. Opening Width of Grab | 1980mm | |||||||||
| Min. Opening Width of Grab | 700mm | |||||||||
| Max. RADIUS Grabing Weight | 650kg | |||||||||
| Grapple rotation angle | 360° | |||||||||
| Steel Wire Rope Tension | 25KN-35KN | |||||||||
| Rope Diameter | ø8mm~ø10mm | |||||||||
| Rope capacity | 50m~100m | |||||||||
| Max dumping height | 4600mm | |||||||||
| Back-end radius of gyration | 1980mm | |||||||||
| DIMENSION | (Length*width*height)Transport Dimensions | 6600*2350*2950mm | ||||||||
| Wheel base | 2400mm | |||||||||
| Track(Front/rear) | 1850mm/1750mm | |||||||||
| Drive axle | Reinforced integral 10Ton Axle | |||||||||
| Ground clearance of counterweight | 1160mm | |||||||||
| Min ground clearance | 200mm | |||||||||
| TECHNICAL PARAMETERS | Angle of rotation | 360° | ||||||||
| Machine weight | 7800kg | |||||||||
| Engine model | YN38GBZ/4102(turbocharged) | |||||||||
| Rated Power | 65kw | |||||||||
| Rated Speed | 2400r/min | |||||||||
| Hydraulic system working pressure | 21Mpa | |||||||||
| Hydraulic system flow | 150L/min | |||||||||
| Variable piston pump | 72ml/r | |||||||||
| Max Hauling force | 12r/min | |||||||||
| Walking speed | 25km/h | |||||||||
| Grade Climbing ability | 58%/30° | |||||||||
| Tyre model | 8.25-16 | |||||||||
| Revolution Overdrive Pressure | 20Mpa | |||||||||
| Full circle swinging time | 5.5s | |||||||||
| Fqt Fuel Quantity | ≥6L/h | |||||||||
| Hydraulic Tank Capacity | 110L | |||||||||
| Capacity Of The Fuel Tank | 110L | |||||||||
){kind=link}